Tips For Installing Single Handle Shower Faucets

Tips For Installing Single Handle Shower Faucets

Single handle shower faucets are a convenient and practical addition to homes that have shower and tub fusion. They do not require any mixer valves or temperature adjustments, as is often the case with multi-handle units. A single thermostat controls the temperature from one handle, leaving you free to enjoy your shower or bath. They are easy to use and eliminate a lot of guesswork when it comes to setting the right temperature. They are designed for simple installation, requiring only a few screws to secure.

The single handle shower faucet is also called a cartridge type, as it operates on a single cartridge. This means that the temperature of the water can be controlled at one temperature and shut off at another. In some units, a knob or lever will allow you to adjust the shut-off valve so that cold water is never shut off while hot water is available. The availability of temperature controls allows you to choose the settings that best suit your individual needs.

There are a couple of things to keep in mind when it comes time to replace your old single handle shower faucet with a new one. First, make sure that the spout is clean and clear so that you can replace it with the cartridge. When the spout is dirty or clogged, it may prevent water from flowing through the cartridge effectively, causing the temperature to fluctuate. If this happens, then you will not have effective water pressure, which can make cleaning your spout much more difficult. In addition, if you notice that the valve does not seal properly, it may be time to get a new one.

One thing to keep in mind when it comes time to install your new single handle shower faucet is that it must be installed with the complete unit in place. As you are installing the faucet, it is possible for the spout to be accidentally pushed if the handlebar is still in good condition. Once the entire unit is installed, turn the water supply on and check to ensure that all of the connections are properly tightened, including the o-ring and the cold water line. Make certain that both the spout and the cold water cylinder are connecting properly to ensure that the proper pressure is maintained. If necessary, re-tighten all of the connections.

Once the single handle is properly connected and the temperature of the water flowing through the faucet is at the setting you desire, you can then turn the shower valve on. Be certain that you turn the water flow clockwise to first start the water flow. Next, close all of the shower valves except the cold water one. Before turning on the hot water valve, turn on the water flow device and make sure that it has properly been seated into its flange. This process should be repeated for each of the shower valves.

After everything has been set up and all of the valves have been tested, you may want to turn off the water supply to your home. Since you are operating these types of faucets without a temperature control, you should always be certain to leave the supply running, or at least have it set to the desired temperature when the unit is not in use. If you find yourself in this situation more than once a year, contact a professional plumber to have a valve fixed to prevent future problems. Single handle shower valves are convenient and affordable, providing you with many options for your bathroom's water flow.

Tags:waterfall tub and shower faucet set | 10 in shower faucet set